AKLU antique system doors and windows

Perfect combination of design concept and Chinese architecture

Antique architecture refers to the architecture that imitates traditional architecture in architectural form. Its appearance basically reflects the main features of traditional architecture , and its structure, materials, and construction technology all reflect the main features of modern architecture. The following is a brief introduction to the main methods of antique architecture design, hoping to help you understand the design of antique architecture. Architectural layout is the first step in the overall design of antique architecture. Generally speaking, it can be done in two ways: garden layout and axis layout. Garden layout is an important design form in antique architecture. Traditional Chinese architecture has a strong dependence on mountains and waters. There are two types of garden layouts: around mountains and waters and through mountains and waters. Around mountains and waters is to take mountains and waters as the center of architectural layout design, and buildings are surrounded by mountains and waters. The typical example of this design is the Summer Palace. The subtlety of this design lies in the fact that the entire building complex is organically connected by mountains and waters, and visitors can overlook the center of the landscape from any place. This layout form of ancient architecture is to use roads or buildings to form a central axis in the middle of the building, and arrange related buildings around the axis in sequence.

This is the most common layout form in antique buildings. Many ancient buildings such as the Forbidden City and the Temple of Heaven adopt this layout form. Modern antique building areas such as Hengdian Film and Television City all adopt the axis layout design. Visitors will have a strong sense of returning to the ancient times. After the basic layout of the building is completed, the detailed design of the building will begin. The detailed design is the soul of the antique building design, which can make the entire building image full. Generally speaking, there are the following aspects

The forms of traditional Chinese architecture are clearly classified, mainly including courtyards, towers, pavilions and halls. The steps of architectural form design are mainly to refer to the main forms of traditional Chinese architecture to carry out the detailed structural design of antique buildings. The core is to organically integrate various traditional design elements, establish a main design form, and then add other elements into it.

For example, if we can determine that "Siheyuan" is the main form of architecture, then in the design, the courtyard will be used as the building's sub-unit, and other elements such as halls and pavilions will be added to each sub-unit. This design makes our building look rich and has a core. Traditional Chinese architecture mainly adopts brick and wood structure, which makes traditional Chinese architecture have a big problem, that is, poor fire resistance and corrosion resistance, short service life, and great safety hazards. On the one hand, modern wood resources are tight, and large-scale use of wood is neither economical nor environmentally friendly, so the design of materials is also a very important factor in antique design. The composition structure of the broken bridge aluminum alloy antique doors and windows combines the environmental protection of wooden windows, the firmness and safety of iron windows and steel windows, and the common characteristics of thermal insulation and energy saving of plastic steel doors and windows. Its structure is more complicated than ordinary aluminum doors and windows, and the cost is higher. Ordinary aluminum does not have insulation strips, does not keep warm or save energy, and only sprays on the surface.

The thermal insulation antique aluminum doors and windows are made of thermal insulation aluminum profiles and hollow glass, which have the functions of energy saving, sound insulation, noise prevention, dust prevention and waterproof. The thermal conductivity coefficient K value of the thermal insulation aluminum doors and windows is below 1.8 W/㎡·K, which reduces the heat loss by half compared with ordinary doors and windows, reduces the heating cost by about 30%, and the sound insulation is above 29 decibels. The water tightness and air tightness are good, which meet the national A1 window standard. The antique windows are increasingly favored by the market for their outstanding advantages such as high strength, good thermal insulation, good rigidity, good fire resistance, large lighting area, good corrosion resistance, high comprehensive performance, long service life and good decorative effect. High-end thermal insulation aluminum alloy antique doors and windows have gradually become the preferred product for high-end antique building windows. Several high-end antique doors and windows launched by Zhongbo Antique System Doors and Windows cater to the design concept of ancient buildings and meet the Chinese human aesthetics of ancient buildings. Generally speaking, tower-style and palace-style antique buildings can use reinforced concrete to form the main body of the building, and use plain concrete joints or antique brick veneer to achieve an antique visual effect. At the same time, the antique design can also be enhanced through interior details, which is mainly the use of ancient elements such as plaques, halls and corridors, and Chinese furniture. In the design, the layout can be based on the layout of halls, halls, and rooms in traditional buildings, which can greatly enhance the details of antique buildings. In short, AKLU's antique door and window design is not to copy the wooden window design concept of ancient buildings, but to combine traditional culture with modern advanced technology to promote the inheritance and development of antique buildings.